$ apt-get install weechat 🙂

https://weechat.org/files/doc/devel/weechat_quickstart.en.html

1. Start WeeChat

A recommended terminal emulator for X (but not mandatory) is rxvt-unicode (it has good UTF-8 support, and no problem with default keyboard bindings).

Run from your shell:

$ weechat

2. Online help / options

WeeChat has help for all commands, just issue:

/help

To get help on a specific command, issue:

/help command

To set options, issue:

/set config.section.option value

(where config is configuration name (weechat for core, or a plugin name), section the section of this configuration and option the option name).

WeeChat immediately uses the new value (you never need to restart WeeChat after changes to configuration).

You can use /set option with partial name and wildcard “*” at the beginning or end to display all options containing letters. For example:

display all options (WeeChat and plugins):

/set

display WeeChat options:

/set weechat.*

display IRC plugin options:

/set irc.*

You can display help for an option with /help, for example:

/help weechat.look.highlight

All settings are saved when WeeChat ends (or with /save command to force a write of the options).

You can edit configuration files (*.conf) by hand and reload them by /reload command if you don’t want to use /set command.
3. Core vs plugins

WeeChat “core” is only used to display data on screen and interact with the user, that means weechat core without plugins is useless (faithful users: IRC was part of core for versions ≤ 0.2.6).

All network protocols like IRC are provided in separate plugins.

Use the /plugin command to list loaded plugins, you should see “irc” and other plugins in the list.
4. Add an IRC server

You can add an IRC server with /server command, for example:

/server add freenode chat.freenode.net

As usual, help is available if you’re lost:

/help server

5. Set custom IRC server options

WeeChat uses default values for all servers (“fall backs”), if you don’t specify a specific value for a server option. These default options are “irc.server_default.*”.

For each server option, WeeChat uses its value if it is defined (not “null”). Otherwise WeeChat uses default value (“irc.server_default.xxx”).

For example there’s default nicks (based on your un*x login), and you can override them for freenode server with following command:

/set irc.server.freenode.nicks “mynick,mynick2,mynick3,mynick4,mynick5”

To set username and realname:

/set irc.server.freenode.username “My user name”
/set irc.server.freenode.realname “My real name”

To enable auto-connect to server at startup:

/set irc.server.freenode.autoconnect on

To connect with SSL:

/set irc.server.freenode.addresses “chat.freenode.net/7000”
/set irc.server.freenode.ssl on

If SASL is available on server, you can use it for authentication (you will be identified before you join channels):

/set irc.server.freenode.sasl_username “mynick”
/set irc.server.freenode.sasl_password “xxxxxxx”

To run a command after connection to server, for example to authenticate with nickserv (only if you don’t use SASL for authentication):

/set irc.server.freenode.command “/msg nickserv identify xxxxxxx”

Note
Many commands in option command can be separated by ; (semi-colon).

To auto-join some channels when connecting to server:

/set irc.server.freenode.autojoin “#channel1,#channel2”

To remove a value of a server option, and use the default value instead, for example to use default nicks (irc.server_default.nicks):

/set irc.server.freenode.nicks null

Other options: you can setup other options with following command (“xxx” is option name):

/set irc.server.freenode.xxx value

6. Connect to IRC server and auto-join channels

/connect freenode

Note
This command can be used to create and connect to a new server without using /server command (should I repeat you can see help for this command with /help connect ?).

By default, server buffers are merged with WeeChat core buffer. To switch between core buffer and server buffers, you can use ctrl+x.

It is possible to disable auto merge of server buffers to have independent server buffers:

/set irc.look.server_buffer independent

7. Join/part IRC channels

Join a channel:

/join #channel

Part a channel (keeping buffer open):

/part [quit message]

Close server or channel buffer (/close is an alias for /buffer close):

/close

8. IRC private messages

Open a buffer and send a message to another user (nick foo):

/query foo this is a message

Close the private buffer:

/close

9. Buffer/window management

A buffer is a component linked to a plugin with a number, a category, and a name. A buffer contains the data displayed on the screen.

A window is a view on a buffer. By default there’s only one window displaying one buffer. If you split screen, you will see many windows with many buffers at same time.

Commands to manage buffers and windows:

/buffer
/window

(I’ll not repeat here that you can get help with /help on these commands)

For example, to vertically split your screen into a small window (1/3 width), and a large window (2/3), use command:

/window splitv 33

10. Key bindings

WeeChat uses many keys by default. All these keys are in the documentation, but you should know at least some vital keys:

alt+←/→ or F5/F6: switch to previous/next buffer

F7/F8: switch to previous/next window (when screen is split)

F9/F10: scroll title bar

F11/F12: scroll nicklist

Tab: complete text in input bar, like in your shell

PgUp/PgDn: scroll text in current buffer

alt+a: jump to buffer with activity (in hotlist)

According to your keyboard and/or your needs, you can rebind any key to a command with /key command. A useful key is alt+k to find key codes.

For example, to bind alt+y to command /buffer close:

/key bind (press alt-k) (press alt-y) /buffer close

You’ll have a command line like:

/key bind meta-y /buffer close

To remove key:

/key unbind meta-y

11. Plugins/scripts

On some distros like Debian, plugins are available via a separate package (like weechat-plugins). Plugins are automatically loaded when found (please look at the WeeChat documentation to load/unload plugins or scripts).

Many external scripts (from contributors) are available for WeeChat, you can download and install scripts from the repository with the /script command, for example:

/script install iset.pl

See /help script for more info.

A list of scripts is available in WeeChat with /script or at this URL: https://weechat.org/scripts
12. More documentation

You can now use WeeChat and read FAQ/documentation for any other questions: https://weechat.org/doc

Enjoy using WeeChat!
Version 1.4-dev
Last updated 2015-06-10 23:21:25 CEST

directadmin bir sunucumuz olsun

bu sunucuda 1 disk olsun

dolayisi ile I/O cok feci olsun

500gb diskde 800 domain/hosting olsun

yedeklemek iskence otesi olsun

gunlerce ugrastiktan sonra gzip yapmadan directadmin.conf icine uygun komutla .tar yapalimda oyle atalim yedekleri demek olsun

o bile fayda etmez olsun

gunler geceler gecsin

artik son anin son aninda iken

cozum kendi kendini bulsun olsun

uzuntu olsun

ama tecrube olsun

yazalim buraya bari olsun…

1- full admin backup aliniz , alirken domains directory ve email data haricindeki herseyi aliniz.
admin backup ekraninda step 4 e dikkat demekki.
2- yedeklerimiz minik olacak ne kadar guzel , scp ile aktariniz yeni yerine.
3- yeni yerinde restore ediniz.
4- restorasyondan sonra, eski sunucuya giriniz /home da sadece aktarilmak istenilen kullanicilar kalicak sekilde duzenleme yapiniz
5- yeni sunucudan ssh-keygen ve ssh-copy-id yaparak eski sunucuya direk baglaniyor olunuz
6- yeni sunucuda bu rsync komutunu calistiriniz.

rsync -ave 'ssh -p 22' 1.2.3.4:/home/ /home/

ve gidip yatip uyuyunuz….

sabaha kalkiniz, hersey tamamlanmis olsun.

tecrube edininiz.

cok edininiz…

http://help.directadmin.com/item.php?id=500

https://github.com/outime/ipv6-dhclient-script

ipv6-dhclient-script

Simple IPv6 configuration script for Debian (Ubuntu…) and RedHat (CentOS, Fedora…) based distros, mainly for Online.net servers but valid for any network that provides IPv6 access through prefix delegation i.e. the static address is configured by the client and an identifier (DUID) is sent to the DHCP server in order to get functional routes.

Servers provided by Online.net won’t come with IPv6 enabled by default so this makes things a bit easier specially when owning multiple servers and IPv6 needs to be enabled by hand in each one.

The script has been successfully tested under:

Ubuntu Server 14.04
Debian 7.0
CentOS 7.0
Proxmox VE w/ OVZ (see Issue #1)

Just run the script and follow the instructions:

$ bash ipv6-dhclient-script.sh

You can also pass parameters straight away:

$ bash ipv6-dhclient-script.sh

cok faydali bir arac

pek cok kucuk diskden fuse kullanarak buyuk bir disk olusturuyoruz

mhddfs kendisi geri kalanini hallediyor

bknz:

/DISK4TB1;/DISK4TB2;/DISK4TB3;/DISK4TB4;/DISK3TB1;/DISK3TB2;/DISK2TB1;/DISK2TB2 24T 13T 11T 54% /BIGDISK

24TB diskim var, pek bir guzel 🙂

detaylar suralarda

1- https://romanrm.net/mhddfs

2- http://zornsoftware.codenature.info/blog/why-i-ditched-raid-and-greyhole-for-mhddfs.html

nano /usr/share/pve-manager/ext4/pvemanagerlib.js

Currently on line 519 of the file, however it may change with future updates, there is a line similar to below;

if (data.status !== 'Active') {

This line is doing the check to see if your subscription status is not ‘Active’. This needs to be changed to return false to stop the subscription message from being shown.

if (false) {

And that annoying little popup will be a thing of the past!

Note: You may need to clear your web browser cache after applying this code change.

Hello,

today is the day I teach you fellow internet people how to reset HP ILO administrator password without rebooting the server.

All you need is to access the OS installed on server.

So this is what it is.

Yes

In my situation, I’ve got Debian installed on my server with ILO Administrator password to be resetted.
so,

Step 1:

nano /etc/apt/sources.list

add:

deb http://downloads.linux.hp.com/SDR/downloads/MCP/debian wheezy/current non-free

Step 2:

add HP key:

wget http://downloads.linux.hp.com/SDR/downloads/MCP/GPG-KEY-mcp

apt-key add GPG-KEY-mcp

Step 3:

apt-get update

apt-get install hponcfg

Step 4:

create a .xml file with correct coding:

nano blabla.xml

Step 5:

execute

hponcfg -f blabla.xml
HP Lights-Out Online Configuration utility
Version 4.2.0 Date 6/10/2013 (c) Hewlett-Packard Company, 2013
Firmware Revision = 1.55 Device type = iLO 3 Driver name = hpilo
Script succeeded

You’re Wellcome ///

Do Not Thank me, Thank to your Internet searching skills instead.

So You found my cute Blog About Nothing :D, and now you can all access to your ILO interfacesssssssss~~~~

2009-02-16
Linux Force Reboot and shutdown
Filed under: Linux — Nasser Heidari @ 09:42
Force Reboot :
#echo 1 > /proc/sys/kernel/sysrq
#echo b > /proc/sysrq-trigger
If you want to force shutdown machine try this.
#echo 1 > /proc/sys/kernel/sysrq
#echo o > /proc/sysrq-trigger


hey
merhaba
jamaicadan bildiriyorum
havalar pek guzel
kafalar pek guzel
mariyuana serbest burda
cakip duruyoruz
ic ic ic
eglence girla
cok egleniyoruz
o kadar mutluyuzki
mutluluktan ucuyoruz
ucuslardayiz
eglencelerdeyiz
bu vesile ile cok eglendigimizi
ve canımızın hiç sıkılmadığınıda söylemeliyim
mutluluk ve huşu içinde
şeytan taşlamaya gideceğiz
taş topladım
bahamalardan
mercan taşi bunlar
daldım otuz metreden
tüpsüz çıkardım taşları
o kadar eğleniyorumki
kelimeler ile anlatılmayan bir sevgi yumağı
hayvanı kestim
kan akıttım
kurban verdim
allah rızası için
boğazladım
sonra derisini yüzdüm
içorganlarını çıkardım
ve işkembesini patlattım
akan kan ile ayakkabilarımın pasını suladım
kan rahmet oldu
yağdı üzerimize
yarabii kabul et yarabii
büyük hayvanın bile
biraz böyle körpece olursa et
iyi pişince
kuzu kadar lezzetli olur
sağlık ve temizlik
hepsinden önemlisi
islami usüllere uygunluk çok önemli
bazıları diyorki
teee aşağılardan duyuluyor sesin
cehennemin 7. katından
duyulur bu sevabın sesi
çocuk gibi anlamaz bazısı
çamurlu ayakkabı ile eve girer
bizim örf adetimize göre
eve girerken
pabuç çıkarılır
hayvanları şu an gördün
hepsi balık gibi
yazın beslenmesi 10 numara olur
bilmeyen bile anlar zayıf olmadığını
zayıflık izdiham nasıl orası ana baba günü gibi
350 civarı
sıra verdik
mercanlar selam söylediler
ve siz gitmeden biz geliriz dediler
orası bir bunaltıyo
millete girme buraya diyorsun
sırası gelince gir
herkes doluyor
herkes
birisi hemen yüzüyor
5 adam mı ne
ordan kayıyo öbürüne
durmaksızın çalışıyorlar
bu arada ot içiyoruz
4 yapraklı
derya kuzusu bunlar
evet
herkes aradı bunları
bilmiyor zannettiler
yalandı butun bunlar
aldı tadını dedim
ilk defa gidiyor ya onlar
ayarlanmış bunların hepsi
bir müşteriye 9 şirkete
hehe
müşteriye denk gelenine geldinmi
teşekkür ederim
kahvelerimizide içelim
evet
şeytan herkesin kafasında
kendimiz yaratıyoruz şeytanı
iyigünler
hayırlı bayramlar olsun
ben hamza güngörenlerdendoğan
ben sizin yeni dayınızım
hayırlı bayramlar olsun
oradaki tüm eş ve dostlarında
bayramını kutluyoruz
var mı diyeceğiniz birşey
bak
şeytanları salarım üstüne
araplar geliyor
kıraçlardan geliyorlar
şimdi bir şiir yazacağım size
şiirimin adı
KOCAMAN ORDA BİR ŞEY VARDI
başlangıçda
bu biraz rahatlattı dediler
yağ oranı fazla olarak
ancak gelirken gitmediler
demem o ki
hayatta en hakiki hurşit
ben aslında gezegenlerde
bu şekilde bir yaşantı
beklemiyordum
al bir tane
ver 10 tane
böyle günde
evler ve bacılar
ve geçmişin tozlu raflarından indirdik o el yazmalarını
bitiş
bak
taam
akşama bekliyorum
bende çok öptüm
byeeee
<-- KnK|79690 (KnK79690@KNK-4FD9D340.clients.kiwiirc.com) has left #KanKaTeaM

1-
sudo apt-get install wsmancli

2-nano amtninamk

ip=<IP of AMT>    
AMT_PASSWORD="<your password for the 'admin' user>"

# Must be exactly *8 characters long* and contain at least one of each:
#   [ lower case, upper case, number, special character ]
VNC_PASSWORD="<what password you want for VNC>"


# Enable KVM
wsman put http://intel.com/wbem/wscim/1/ips-schema/1/IPS_KVMRedirectionSettingData -h $ip -P 16992 -u admin -p ${AMT_PASSWORD} -k RFBPassword=${VNC_PASSWORD}

# Enable KVM redirection to port 5900
wsman put http://intel.com/wbem/wscim/1/ips-schema/1/IPS_KVMRedirectionSettingData -h $ip -P 16992 -u admin -p ${AMT_PASSWORD} -k Is5900PortEnabled=true

# Disable opt-in policy
wsman put http://intel.com/wbem/wscim/1/ips-schema/1/IPS_KVMRedirectionSettingData -h $ip -P 16992 -u admin -p ${AMT_PASSWORD} -k OptInPolicy=false

# Disable session timeout
wsman put http://intel.com/wbem/wscim/1/ips-schema/1/IPS_KVMRedirectionSettingData -h $ip -P 16992 -u admin -p ${AMT_PASSWORD} -k SessionTimeout=0

# Enable KVM
wsman invoke -a RequestStateChange http://schemas.dmtf.org/wbem/wscim/1/cim-schema/2/CIM_KVMRedirectionSAP -h ${ip} -P 16992 -u admin -p ${AMT_PASSWORD} -k RequestedState=2

2-a

sh amtninamk

3- sudo apt-get install gtkvncviewer

4- gtkvncviewer

go go go ?

02:28 itibari ile basarili bir baglanti kuramadim henuz.
ancak KVM vnc 5900 den dinliyor. Maasallah!