whois -S Ip.ad.Re.Si -h das.eu naber.eu 🙂
https://github.com/rfc1036/whois
patch
https://gist.github.com/akagisho/10390126
ben ne yaptim
make / make install
ok Ich liebe Mich!
whois -S Ip.ad.Re.Si -h das.eu naber.eu 🙂
https://github.com/rfc1036/whois
patch
https://gist.github.com/akagisho/10390126
ben ne yaptim
make / make install
ok Ich liebe Mich!
Dunning–Kruger etkisi ya da Dunning–Kruger sendromu, Cornell Üniversitesinin iki psikologu Justin Kruger ve David Dunning’in tanımladığı bir algılamada yanlılık eğilimidir.
Cornell University’de görevli psikologlar Justin Kruger ve David Dunning’in tarihe geçmelerine ve 2000’de Nobel almalarına neden olan tanı, “Cahil cesareti” olarak tanımlanıyor. Teorileri özetle, “cehalet, gerçek bilginin aksine, bireyin kendine olan güvenini artırır” diyor.
Araştırmalar sonucunda şu bulgulara ulaşılmış:
Niteliksiz insanlar ne ölçüde niteliksiz olduklarını fark edemezler.
Niteliksiz insanlar, niteliklerini abartma eğilimindedir.
Niteliksiz insanlar, gerçekten nitelikli insanların niteliklerini görüp anlamaktan da acizdirler.
Nitelikleri, eğitimle artırılırsa, aynı niteliksiz insanlar, niteliksizliklerinin farkına varmaya başlarlar.
Cornell Üniversitesi’ndeki öğrenciler arasında bir test yapıldı ve klasik “Nasıl geçti?” sorusuna öğrencilerden yanıtlar istendi…
Soruların yüzde 10’una bile yanıt veremeyenlerin “kendilerine güvenleri” müthişti. Onların “testin yüzde 60’ına doğru yanıt verdiklerini” düşündükleri; hatta “iyi günlerinde olmalarıhalinde
yüzde 70 başarıya bile ulaşabileceklerine inandıkları” ortaya çıktı.
Soruların yüzde 90’ından fazlasını doğru yanıtlayan-lar ise “en alçakgönüllü” deneklerdi; soruların yüzde 70′ ine doğru yanıtverdiklerini düşünüyorlardı.
Tüm bu sonuçlar bir araya getirildi ve Dunning-Kruger Sendromu’nun metni yazıldı:
“İşinde çok iyi olduğuna” yürekten inanan ‘yetersiz’ kişi, kendini ve yaptıklarını övmekten, her işte öne çıkmaktan ve aslında yapamayacağı işlere talip olmaktan hiçbir rahatsızlık duymaz! Aksine her şeyin
hakkı olduğunu düşünür!
Ancak bu ‘cahillik ve haddini bilmeme’ karışımı mesleki açıdan müthiş bir itici güç oluşturur.
‘Eksiler’ kariyer açısından ‘artıya’ dönüşür.
Sonuçta, ‘kifayetsiz muhterisler’ her zaman ve her yerde daha hızlı yükselirler…
Bu arada, gerçekten bilgili ve yetenekli insanlar çalışma hayatında ‘fazla alçakgönüllü’ davranarak öne çıkmaz, yüksek görevlere kendiliklerinden talip olmaz, kıymetlerinin bilinmesini beklerler…Tabii beklerken kırılır, kendilerini daha da geriye çekerler… Muhtemelen üstleri tarafından da ‘ihtiras eksikliği’ ile suçlanırlar…”
kaynak: http://www.aktuelpsikoloji.com/dunning-kruger-sendromu-nedir-14694h.htm
kaynak2: https://en.wikipedia.org/wiki/Dunning%E2%80%93Kruger_effect
# session management
tmux list-sessions
tmux new -s session-name
Ctrl-b d Detach from session
tmux attach -t [session name]
tmux kill-session -t session-name
Ctrl-b c Create new window
Ctrl-b d Detach current client
Ctrl-b l Move to previously selected window
Ctrl-b n Move to the next window
Ctrl-b p Move to the previous window
Ctrl-b & Kill the current window
Ctrl-b , Rename the current window
Ctrl-b q Show pane numbers (used to switch between panes)
Ctrl-b o Switch to the next pane
Ctrl-b ? List all keybindings
# moving between windows
Ctrl-b n (Move to the next window)
Ctrl-b p (Move to the previous window)
Ctrl-b l (Move to the previously selected window)
Ctrl-b w (List all windows / window numbers)
Ctrl-b window number (Move to the specified window number, the
default bindings are from 0 — 9)
# Tiling commands
Ctrl-b % (Split the window vertically)
Ctrl-b : “split-window” (Split window horizontally)
Ctrl-b o (Goto next pane)
Ctrl-b q (Show pane numbers, when the numbers show up type the key
to goto that pane)
Ctrl-b { (Move the current pane left)
Ctrl-b } (Move the current pane right)
# Make a pane its own window
Ctrl-b : “break-pane”
# add to ~/.tmux.conf
bind | split-window -h
bind – split-window -v
Zimbra as a backup MX server
(Zimbra Community 5.0.8 & NE 4.5)
Had a hard time finding this info and finally found one post that correctly pointed in the right direct but didn’t actually detail all the info.
Backup MX: Have Zimbra accept mail on behalf of some other domain in the event the other domain is temporarily unavailable and forward to other domain when it becomes available.
Yes I know about dynamic dns providers offering backup facilities but I want my mail housed/processed by people I know and trust and not some other company. I also don’t want to pay extra to some other company when we have perfectly good facilities ourselves.
Postfix does this with the “relay_domains” functionality. Although Postfix is the MTA under the covers, I want a solution that will work with Zimbra’s configuratinon umbrella and not get smoked by an upgrade or system restart.
Server “thisdomain.com” wants to provide relay services for server “thatdomain.com”.
1. Add the domain to the server:
zmprov cd thatdomain.com zimbraAuthMech zimbra
2. Create full-domain forwarding to the intended destination:
zmprov md thatdomain.com zimbraMailCatchAllAddress @thatdomain.com
zmprov md thatdomain.com zimbraMailCatchAllForwardingAddress @thatdomain.com
zmprov md thatdomain.com zimbraMailTransport smtp:thatdomain.com
3. Have “thatdomain.com” mgnt add “thisdomain.com” as a higher number MX record to their DNS entry.
iptables -A INPUT -s 95.108.128.0/17 -j DROP
iptables -A INPUT -s 178.154.128.0/17 -j DROP
iptables -A INPUT -s 37.140.141.0/24 -j DROP
iptables -A INPUT -s 5.45.192.0/18 -j DROP
iptables -A INPUT -s 37.140.128.0/18 -j DROP
iptables -A INPUT -s 157.55.39.0/24 -j DROP
iptables -A INPUT -s 5.255.192.0/18 -j DROP
iptables -A INPUT -s 93.158.172.0/23 -j DROP
iptables -A INPUT -s 141.8.128.0/18 -j DROP
/sbin/service iptables save cat /etc/sysconfig/iptables
centos7+ ?
iptables-save
block yandex bot ip ranges
# Generated by iptables-save v1.4.7 on Sat May 2 05:05:07 2015 *filter :INPUT ACCEPT [122:8629] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [110:82633] -A INPUT -s 178.154.160.0/22 -j DROP -A INPUT -s 178.154.164.0/23 -j DROP -A INPUT -s 178.154.128.0/17 -j DROP -A INPUT -s 5.255.253.0/24 -j DROP -A INPUT -s 37.140.141.0/24 -j DROP -A INPUT -s 5.45.254.0/24 -j DROP COMMIT # Completed on Sat May 2 05:05:07 2015 /etc/sysconfig/iptables (END)
1- /sbin/iptables -A INPUT -s 5.45.254.0/24 -j DROP
2- /sbin/service iptables save
3- less /etc/sysconfig/iptables
——-
ek
——-
Yandex Bot IP Addresses
37.9.115.0/24, 37.140.165.0/24, 77.88.22.0/25, 77.88.29.0/24, 77.88.31.0/24, 77.88.59.0/24, 84.201.146.0/24, 84.201.148.0/24, 84.201.149.0/24, 87.250.243.0/24, 87.250.253.0/24, 93.158.147.0/24, 93.158.148.0/24, 93.158.151.0/24, 93.158.153.0/32, 95.108.128.0/24, 95.108.138.0/24, 95.108.150.0/23, 95.108.158.0/24, 95.108.156.0/24, 95.108.188.128/25, 95.108.234.0/24, 95.108.248.0/24, 100.43.80.0/24, 130.193.62.0/24, 141.8.153.0/24, 178.154.165.0/24, 178.154.166.128/25, 178.154.173.29, 178.154.200.158, 178.154.202.0/24, 178.154.205.0/24, 178.154.239.0/24, 178.154.243.0/24, 37.9.84.253, 199.21.99.99, 178.154.162.29, 178.154.203.251, 178.154.211.250, 95.108.246.252, 5.45.254.0/24, 5.255.253.0/24, 37.140.141.0/24, 37.140.188.0/24, 100.43.81.0/24, 100.43.85.0/24, 100.43.91.0/24, 199.21.99.0/24
——-
ek2\
——-
http://bgp.he.net/AS13238#_prefixes
——–
UPDATE
——–
Install Plex Media Server on Debian
Install curl
sudo apt-get install curl -y
Now add source repositories, there are three separate lines here
sudo curl http://shell.ninthgate.se/packages/shell-ninthgate-se-keyring.key | sudo apt-key add –
echo “deb http://www.deb-multimedia.org wheezy main non-free” | sudo tee -a /etc/apt/sources.list.d/deb-multimedia.list
echo “deb http://shell.ninthgate.se/packages/debian wheezy main” | sudo tee -a /etc/apt/sources.list.d/plex.list
Make sure it runs
sudo apt-get update && sudo apt-get install deb-multimedia-keyring
Update and install the plex media server
sudo apt-get update && sudo apt-get install plexmediaserver -y
See if you can connect at http://ip.address:32400/manage/index.html
Plex media server will autoboot 🙂
If you are getting permission issues it is because Plex runs as its own user, you can change the user Plex Media Server runs as to fix the permission issues you get from CouchPotato, SickRage, Sonarr, Headphones and others.
sudo nano /etc/default/plexmediaserver
Find this line
PLEX_MEDIA_SERVER_USER = plex
Change plex to your regular user
PLEX_MEDIA_SERVER_USER = username
Ctrl+X, Y and Enter to save the configuration
Restart the Plex Media Server service
sudo service plexmediaserver restart
Configure Plex Media Server
Open up your Plex web interface at http://ip.address:32400/web
NOTE: Plex media server must be configured form localhost.
consider connecting over ssh proxy..
Because they need to check quota info before booting when the server node rebooted in an inproper way.
it takes ages to calculate quota and boot containers in big servers with lot’s of ram and lot’s of containers.
more info here:
http://forum.openvz.org/index.php?t=msg&goto=30102&
so basically
to fasten things up
if you are trying to boot your containers when you come back from a power failure:
vzquota off $VEID
vzctl start $VEID
vzquota on $VEID
yes I know, ploop is the answer, or is it?
I’m gonna check it later…
asagidaki scripti kopyala
yapistir
calistir.
apt-get update apt-get install software-properties-common -y add-apt-repository ppa:x2go/stable -y apt-get update apt-get install dbus xubuntu-desktop gksu leafpad synaptic x2goserver x2goserver-xsession htop vnstat fail2ban ssh mtr-tiny -y apt-get install xubuntu-community-wallpapers -y apt-get install -f -y apt-get autoremove -y apt-get upgrade -y apt-get clean -y echo DONE....
1- once virtual mac yarat panelden sunucuya verecegim ip icin
2- proxmox uzerinde bridged olarak network tanimladiktan sonra kvm makina icin virtual maci mac olarak ver makinaya eth0ina
3- centos kurulumunu yap
4- network ayarlari su sekilde olacak
/etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth0 TYPE=Ethernet UUID=9fc997a3-5feb-4d72-925b-6fad4e991af8 ONBOOT=yes NM_CONTROLLED=yes BOOTPROTO=none IPADDR=171.23.10.199 PREFIX=32 GATEWAY=176.31.104.254 DNS1=8.8.8.8 DNS2=8.8.4.4 DOMAIN=ayoy.net DEFROUTE=yes IPV4_FAILURE_FATAL=yes IPV6INIT=yes NAME="System eth0" HWADDR=02:00:00:d4:61:99 IPV6_AUTOCONF=no IPV6_DEFROUTE=yes IPV6_FAILURE_FATAL=yes NETMASK=255.255.255.255 USERCTL=no
NOT: gateway ana proxmox nodun gatewayi olacak
route -n ile ana makinada bakip bulabilirsin
broadcast 255.255.255.255 olacak
5- bi dosya daha elle ekleyecegiz sisteme
nano /etc/sysconfig/network-scripts/route-eth0
176.31.104.254 dev eth0 default via 176.31.104.254 dev eth0
buda gateway icin gerekiyor
baska turlu disari cikmiyor ip
6- service network restart
olduda bitti masallah!