http://www.cyberciti.biz/faq/iptables-block-port/
Block Incoming Request From IP 1.2.3.4
The following command will drop any packet coming from the IP address 1.2.3.4:
/sbin/iptables -I INPUT -s {IP-HERE} -j DROP
/sbin/iptables -I INPUT -s 1.2.3.4 -j DROP
You can also specify an interface such as eth1 via which a packet was received:
/sbin/iptables -I INPUT -i {INTERFACE-NAME-HERE} -s {IP-HERE} -j DROP
/sbin/iptables -I INPUT -i eth1 -s 1.2.3.4 -j DROP
Please note that when the “!” argument is used before the interface name, the sense is inverted:
/sbin/iptables -I INPUT ! -i {INTERFACE-NAME-HERE} -s {IP-HERE} -j DROP
/sbin/iptables -I INPUT ! -i eth1 -s 1.2.3.4 -j DROP
If the interface name ends in a “+”, then any interface which begins with this name will match. If this option is omitted, any interface name will match:
/sbin/iptables -I INPUT -i {INTERFACE-NAME-HERE}+ -s {IP-HERE} -j DROP
/sbin/iptables -I INPUT -i br+ -s 1.2.3.4 -j DROP
You can replace -I INPUT (insert) with -A INPUT (append) rule as follows:
/sbin/iptables -A INPUT -s 1.2.3.4 -j DROP /sbin/iptables -i eth1 -A INPUT -s 1.2.3.4 -j DROP
How Do I Block Subnet (xx.yy.zz.ww/ss)?
Use the following syntax to block 10.0.0.0/8 on eth1 public interface:
# /sbin/iptables -i eth1 -A INPUT -s 10.0.0.0/8 -j DROP
How Do I Block and Log Dropped IP Address Information?
You can turn on kernel logging of matching packets with LOG target as follows:
# /sbin/iptables -i eth1 -A INPUT -s 10.0.0.0/8 -j LOG --log-prefix "IP DROP SPOOF A:"
The next rule will actually drop the ip / subnet:
# /sbin/iptables -i eth1 -A INPUT -s 10.0.0.0/8 -j DROP
How Do I View Blocked IP Address?
Simply use the following command:
# /sbin/iptables -L -v
OR
# /sbin/iptables -L INPUT -v
OR
# /sbin/iptables -L INPUT -v -n
Sample outputs:
Chain INPUT (policy ACCEPT 3107K packets, 1847M bytes)
pkts bytes target prot opt in out source destination
0 0 DROP all -- br+ any 1.2.3.4 anywhere
0 0 DROP all -- !eth1 any 1.2.3.4 anywhere
0 0 DROP all -- !eth1 any 1.2.3.4 anywhere
How Do I Search For Blocked IP Address?
Use the grep command as follows:
# /sbin/iptables -L INPUT -v -n | grep 1.2.3.4
How Do I Delete Blocked IP Address?
First, you need to display blocked IP address along with line number and other information, enter:
# iptables -L INPUT -n --line-numbers
# iptables -L INPUT -n --line-numbers | grep 1.2.3.4
Sample outputs:
num pkts bytes target prot opt in out source destination 1 0 0 DROP 0 -- * * 116.199.128.1 0.0.0.0/0 2 0 0 DROP 0 -- * * 116.199.128.10 0.0.0.0/0 3 0 0 DROP 0 -- * * 123.199.2.255 0.0.0.0/0
To delete line number 3 (123.199.2.255), enter:
# iptables -D INPUT 3
Verify the same, enter:
# iptables -L INPUT -v -n
You can also use the following syntax:
# iptables -D INPUT -s 1.2.3.4 -j DROP
How Do I Save Blocked IP Address?
If you are using Redhat / RHEL / CentOS / Fedora Linux, type the following command:
# iptables -D INPUT -s 1.2.3.4 -j DROP
##########################
#////// command to save iptables ///////#
##########################
# /sbin/service iptables save
# less /etc/sysconfig/iptables
# grep '1.2.3.4' /etc/sysconfig/iptables
For all other Linux distributions use the iptables-save command to dump the contents of an IP Table to a file:
# iptables-save > /root/myfirewall.conf
Please not that you need to run the ‘iptables-save’ or ‘service iptables save’ as soon as you add or delete the ip address.
A Note About Restoring Firewall
To restore your firewall use the iptables-restore command to restore IP Tables from a file called /root/myfirewall.conf, enter:
# iptables-restore < /root/myfirewall.conf
How Do I Block Large Number Of IP Address or Subnets?
You need to write a shell script as follows:
#!/bin/bash _input="/root/blocked.ip.db" IPT=/sbin/iptables $IPT -N droplist egrep -v "^#|^$" x | while IFS= read -r ip do $IPT -A droplist -i eth1 -s $ip -j LOG --log-prefix "IP BlockList " $IPT -A droplist -i eth1 -s $ip -j DROP done < "$_input" # Drop it $IPT -I INPUT -j droplist $IPT -I OUTPUT -j droplist $IPT -I FORWARD -j droplist
See also: iptables: Read a List of IP Address From File And Block
Block Outgoing Request From LAN IP 192.168.1.200?
Use the following syntax:
# /sbin/iptables -A OUTPUT -s 192.168.1.200 -j DROP
# /sbin/service iptables save
You can also use FORWARD default chainswhen packets send through another interface. Usually FORWARD used when you setup Linux as a router:
# /sbin/iptables -A FORWARD -s 192.168.1.200 -j DROP
# /sbin/service iptables save
